Reading a ducted heat pump quote room by room
Two quotes can promise “whole-home comfort” while allowing for different rooms, duct runs and control zones. Give each contractor the same floor plan and mark which bedroom doors normally stay closed at night. Ask them to draw their proposed distribution system on it.
Look beyond the bedroom outlets
Identify the supply grille in each served room and the proposed return grille. Ask the designer how air from each room gets back to the unit with the door closed. A count of supply outlets alone cannot answer that question. If the quote excludes a room, make sure it is marked clearly on the plan.
Make the controls part of the quote
Ask which rooms share a zone, where each temperature sensor will sit and what happens when only one zone is calling. A controller in the hallway may see a different temperature from a sunny bedroom. Request a simple explanation of the settings your household will actually use at bedtime and when leaving for work.
Check access before the ceiling is closed
For a retrofit, ask how the indoor unit, filters and drain can be inspected later. For a renovation, confirm when duct routes and access panels must be agreed with the builder. Keep the commissioning record and the final grille plan. They give a service technician a starting point if one room feels different the following winter.
Local directory: Hamilton Ducted Systems. Further reading: Daikin New Zealand’s explanation of ducted layouts.